3–Interactive CommandsStatistics Menu (Command Line Options -gs and -ls)SN0054614-00 K 3-93The file name extension .csv indicates a comma separated value file type.Show HBA Statistics13: Statistics 1: HBA Statistics 1: Show HBA StatisticsTo view the adapter port statistics:1. From the Main Menu, type the number for the Statistics option, and thenpress ENTER.2. From the Statistics Menu, type the number for the HBA Statistics option,and then press ENTER.3. From the HBA Statistics Menu, type the number for the Show HBAStatistics option, and then press ENTER.4. The Statistics Menu appears and prompts you to select an adapter port.Type the number for the port, and then press ENTER.The adapter statistics for that port are shown. For example:------------------------------------------------------------------------------HBA Instance 0: 2200 Port 1 WWPN 21-00-00-E0-8B-03-55-7C PortID 00-00-EF------------------------------------------------------------------------------HBA Port Statistics-----------------------------------------The following keys are in use during test: | - Reset All Counters - Abort Test-----------------------------------------HBA Port Errors Device Errors Reset I/O Count IOPS BPS Time--- ----------- ------------- ----- ---------- ----- ---------- -----------0 0 0 30568 0 0 0 09:43:43 AMLink Status(Command Line Option -ls)13: Statistics 2: Link StatusThe following sections describe how to view and change the adapter’s link status.From the Main Menu, select Statistics and then select Link Status. When youselect the Link Status option, SANsurfer FC/CNA HBA CLI shows the followingoptions:NOTE:Under Solaris, link status is disabled if you are using drivers from the OSinstallation CDs (QLC driver).
