3–Interactive CommandsHBA Parameters Menu3-28 SN0054614-00 K1. Connection Options (read-only on QLE8042, QLE/QMI81xx, and SMB adapters):0 = Loop Only1 = Point-to-point Only2 = Loop preferred, otherwise Point-to-Point3 = Point-to-Point, otherwise Loop (QLA22xx Only)2. Data Rate (read only on QLE8042 and SMB adapters):0 = 1 Gbs1 = 2 Gbs2 = Auto3 = 4 Gbs4 = 8 Gbs3. Others:0 = Disable1 = Enable4. Option is not available on 4Gb or latest adapters.5. Option is available on 4Gb or latest adapters.6. Operation Modes:0 = Interrupt for every I/O completion5 = Interrupt when Interrupt Delay Timer expires.6 = Interrupt when Interrupt Delay Timer expires or no active I/O.Connection Options3: HBA Parameters 1: Port Number 2: Configure HBA Parameters n. Connection OptionsFrom this menu, you can configure the connection options: 0—Loop Only 1—Point to Point Only 2—Loop Preferred, Otherwise Point-to-Point 3—Point-to-Point, Otherwise Loop (QLA22xx adapter only)Type the number for the connection type you want, and then press ENTER.ResetDelay RD 0–255Table NotesNOTE: Connection options are read-only on QLE8042, QLE/QMI81xx, and SMBadapters. QLE/QMI81xx adapters support only the Point to Point Only option.Table 3-1. Adapter Parameters Settings (NVRAM) (Continued)Parameter Name Alias Value Description
