4–Non-Interactive CommandsCommand SummarySN0054614-00 K 4-35To disable (deselect) a LUN on a specific target on a specific adapter, type:# scli -m (<hba instance> | <hba wwpn>) {<target wwnn> <targetwwpn> <lun id> (0 | disable | deselect)}To enable (select) all LUNs for a specific target on a specific adapter, type:# scli -m (<hba instance> | <hba wwpn>) select | enable<target wwnn> <target wwpn>To disable (deselect) all LUNs for a specific target on a specific adapter, type:# scli -m (<hba instance> | <hba wwpn>) deselect | disable<target wwnn> <target wwpn>To enable (select) all LUNs of all targets on a specific adapter:# scli -m (<hba instance> | <hba wwpn>) select allTo disable (deselect) all LUNs of all targets on a specific adapter:# scli -m (<hba instance> | <hba wwpn>) deselect all-n(Set Selected HBA Parameter)To set a specific parameter on a specific adapter, type:# scli -n (<hba instance> | <hba wwpn>) { (<param name> |<param alias>) <param value> }To restore the default BIOS (4G adapters only), type:# scli -n (<hba instance> | <hba wwpn>) defaultWhere:NOTE:You can repeat the sequence <target wwnn> <target wwpn> <lunid> 1 to select multiple LUNs in the same command.NOTE:To select multiple LUNs in the same command, repeat the followingsequence:<target wwnn> <target wwpn> <lun id> 0hba instance = Adapter number (use -g command to find)hba wwpn = World wide port name of the adapterparam name = Name of the parameters
