3–Interactive CommandsHBA Parameters MenuSN0054614-00 K 3-33HBA Parameters (Per FCoE Engine)3: HBA Parameters n: FCoE EngineThe FCoE Parameters menu appears only for the QLE8042 adapter and has thefollowing options: Display FCoE Parameters Configure FCoE Parameters Return to Previous MenuDisplay FCoE Parameters3: HBA Parameters n: FCoE Engine1: Display FCoE ParametersWhen you select this option, the FCoE Port Selection menu appears. Select aport number and then press ENTER to show the FCoE parameters for thatinstance, as shown in the following example:FCoE Port Selection MenuFCoE Engine (QLE8042)Desc: QLE8042 Mercury CNA1: Port 02: Port 13: Return to Previous MenuNote: 0 to return to Main MenuEnter Selection: 1------------------------------------------------------FCoE Parameters Port 0------------------------------------------------------Host Name : TARGET3HBA Instance : 3HBA Model : QLE8042HBA Description : QLE8042 Mercury CNAPort Type : AccessPause Type : Priority Flow ControlPriority Pause Mask : 0[ ] 1[ ] 2[ ] 3[x] 4[ ] 5[ ]6[ ] 7[ ]FCoE Config : T11 Rev 0 Frame FormatFCoE COS : 3Configure FCoE Parameters3: HBA Parameters n: FCoE Engine2: Configure FCoE ParametersWhen you select this option, the FCoE Port Selection menu appears. Select aport number and then press ENTER to list the configurable FCoE parameters forthat instance. For example:
