4–Non-Interactive CommandsCommand Summary4-20SN0054614-00 KWhere:To set an alias for the selected adapter:#scli-ha(<hbainstance> |<hbawwpn>)<alias>To delete the current alias of the selected adapter:#scli-ha(<hbainstance> |<hbawwpn>)deleteTo view the current alias of the selected adapter:#scli-ha(<hbainstance> |<hbawwpn>)view| ?-i(Display HBA General Information or VPD Information for One or All HBAs)To show general adapter information or VPD information for all adapter ports inthe system, type the following command:#scli-i[][ ]Where:To show general or VPD information for a specific adapter, type:#scli-I(<hbainstance>| <hbawwpn>)[VPD]To show VPD (QLA/QLE24xx only) for all adapter ports in the system, type:#scli-iVPD#scli-iallVPDWhere:-kl(Loopback Test)Use the-klcommand to perform the loopback test.Use the-krcommand to perform the read/write buffer test (see “Run aRead/Write Buffer Test” on page 4-28).To do a loopback test with the default parameters, type:hba instance= Adapter number (use-gcommand to find)hba wwpn= World wide port name of the adapteralias= Symbolic adapter name. (100 characters, maximum)all= All adapters in the systemVPD= Vital Product Dataall= VPD information for all adapters in the system
