SN0054614-00 KA-1AXML Format 1Output PartsThe-x1command line option (see “-x (Output in XML Format 1)” on page 4-48)shows all output in XML format 1. This section defines the XML format 1 output,which consists of the following parts:“Main Tag” on page A-1“Utility Header” on page A-1“Status Message” on page A-2“Reboot Message” on page A-2“Error Message” on page A-2Main TagWhen SANsurfer FC/CNA HBA CLI is in XML mode, all outputs are within themain tag:...Utility HeaderThe following header information is shown after the main tag:SANsurferCommand LineUtilityX.YY.ZZBuild XXNOTE:XML files created using the-x1command line optiondo notmatch standardoutput. They are designed for backward compatibility with customizedlegacy scripts. For new scripts, we strongly recommend using the-x2command line option, which generates XML files compatible with standardoutput (see Appendix B).
