3–Interactive CommandsFCoE Menu (Command Line Option -cna)3-108 SN0054614-00 KHit to continue:FCoE Menu(Command Line Option -cna)16: FCoEFibre Channel over Ethernet (FCoE) is a new technology that allows FC storagetraffic to travel over an Ethernet fabric. This promotes I/O consolidation, wherebydata (TCP/IP) and storage (FCoE) traffic can travel over the same sharedEthernet medium. Each traffic type is tagged with a different VLAN ID, resulting inreduced adapter, cabling, switch, power, and cooling costs. By design, FCoEpreserves existing FC storage and management tool investment by retaining theFC protocol and familiar FC services, such as WWNs, zoning, and LUN masking.The FCoE menu is available only for the QLE80xx, QLE81xx, and QMI81xxadapters. When you select FCoE from the main menu, SANsurfer FC/CNA HBACLI displays a submenu that varies depending on whether the installed adapter isa QLE80xx (FCoE adapter) or a QLx81xx (converged network adapter). Refer tothe appropriate section for your adapter type: “FCoE Utilities Menu for QLE80xx Adapters” on page 3-108 “FCoE Utilities Menu for QLx81xx Adapters (Command Line Option -cna)”on page 3-111FCoE Utilities Menu for QLE80xx AdaptersThe FCoE Utilities menu for the QLE80xx FCoE adapter prompts you to selectan FCoE engine, and then provides the following menu for that engine:FCoE Utilities MenuFCoE Engine (QLE8042)Desc: QLE8042 Mercury CNA1: Update Firmware2: Stats3: Logs4: Return to Previous Menu
