© Copyright Qvis® All documentation rights reserved. 1125.5.1 HDD ManagementHere is for you to view and implement hard disk management. See Figure 5-45. You can seecurrent HDD type, status, capacity and record time. When HDD is working properly, system isshown as O. When HDD error occurred, system is shown as X. Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-46. (Thisinterface is just like the abnormity setup). Please refer to chapter 5.5.2 for detailedinformation. HDD operation: You can select HDD mode from the dropdown list such as read-only oryou can erase all data in the HDD. Please note system needs to reboot to get all themodification activated.Figure 5-45Please highlight icon to select the corresponding function.Figure 5-46
