© Copyright Qvis® All documentation rights reserved. 1397 WEB OPERATION7.1 Network ConnectionBefore web operation, please check the following items: Network connection is right DVR and PC network setup is right. Please refer to network setup(Setup ->Network) Use order ping ***.***.***.*** (* DVR IP address) to check connection is OK or not. Usuallythe return TTL value should be less than 255. Open the IE and then input DVR IP address. System can automatically download latest web control and the new version can overwritethe previous one. If you want to un-install the web control, please run uninstall webrec3.0.bat. Or you can go toC:\Program Files\webrec to remove single folder. Please note, before you un-install, pleaseclose all web pages, otherwise the un-installation might result in error. Current series product supports various browsers such as Safari, firebox browser, Googlebrowser. Device only support 1-channel monitor on the Apple PC.7.2 LoginOpen IE and input DVR address in the address column. For example, if your DVR IP is10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 7-1.Figure 7-1System pops up warning information to ask you whether install webrec.cab control or not. Pleaseclick yes button.Input your IPaddress here.
