© Copyright Qvis® All documentation rights reserved. 134In X 3 9 9 H 3 9 9 H 3 9 9 H Figure 6-2X, please click direction arrows (See X 4 0 0 H 4 0 0 H 4 0 0 H Figure 6-3X ) to adjust PTZ position. There aretotally eight direction arrows. (Please note there are only four direction arrows in DVR frontpanel.)Figure 6-36.1.1 3D Intelligent Positioning KeyIn the middle of the eight direction arrows, there is a 3D intelligent positioning key. See X 4 0 1 H 4 0 1 H 4 0 1 H Figure6-4X. Please make sure your protocol supports this function and you need to use mouse to control.Click this button, system goes back to the single screen mode. Drag the mouse in the screen toadjust section size.Figure 6-4Here is a sheet for you reference:Name Functionkeyfunction ShortcutkeyFunctionkeyfunction ShortcutkeyZoom Near Far Focus Near │ Far ►│Iris close Open 6.2 Preset /Patrol / Pattern /Border FunctionIn X 4 0 2 H 4 0 2 H 4 0 2 H Figure 6-2X click the set button. The interface is shown as below:Here you can set the following items: Preset Patrol Pattern Border
