© Copyright Qvis® All documentation rights reserved. 1447.4 Real-time MonitorIn section 2, left click the channel name you want to view, you can see the corresponding videoin current window.On the top left corner, you can view device IP, channel number, network monitor bit stream. SeeFigure 7-10.Figure 7-10On the top right corer, there are six Action buttons. See Figure 7-11.Figure 7-11 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. rightclick mouse system restores original status. 2: Local record: When you click local record button, the system begins recording and thisbutton becomes highlighted. You can go to system folder RecordDownload to view therecorded file. 3: Snapshot picture: You can snapshoot important video. All images are memorized insystem client folder PictureDownload (default). 4: Audio:Turn on or off audio.(It has no relationship with system audio setup ) 5: Close video.7.5 PTZBefore PTZ operation, please make sure you have properly set PTZ protocol. (Please refer tochapter 0.0.0 ).There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligentpositioning key.Click 3D intelligent positioning key, system goes back to the single screen mode. Drag themouse in the screen to adjust section size. It can realize PTZ automatically.1 2 3 4 561 2 3
