© Copyright Qvis® All documentation rights reserved. 116Figure 5-515.5.2 AbnormalityAbnormality interface is shown as in Figure 5-52. Event type: There are several options for you such as disk error, no disk, disconnection,IP conflict, MAC conflict and etc. Alarm output: Please select alarm activation output port (multiple choices). Latch: Here you can set corresponding delaying time. The value ranges from 10s-300s.System automatically delays specified seconds in turning off alarm and activated output afterexternal alarm cancelled. Show message: system can pop up the message in the local screen to alert you whenalarm occurs. Alarm upload: System can upload the alarm signal to the network (including alarmcentre) if you enabled current function. Send email: System can send out email to alert you when alarm occurs. Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.Figure 5-52
