© Copyright Qvis® All documentation rights reserved. 69Figure 4-324.7 Alarm Setup and Alarm ActivationBefore operation, please make sure you have properly connected alarm devices such asbuzzer.4.7.1 Go to alarm setup interfaceIn the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 4-33.4.7.2 Alarm setupAlarm interface is shown as below. See Figure 4-33. Alarm in: Here is for you to select channel number. Event type: There are two types. One is local input and the other is network input. Type: normal open or normal close. PTZ activation: When an alarm occurred, system can activate the PTZ operation. The PTZactivation lasts an anti-dither period. In the Pan/Tilt/Zoom interface (Main menu->Setting-> Pan/Tilt/Zoom), please set videochannel, speed dome protocol and etc. Select the channel of current speed dome as current monitor video and the right clickmouse to select Pan/Tilt/Zoom item. Now you can set preset, tour pattern. In Figure 4-33, click “select” button, you can see an interface is shown as in Figure 4-34.Here you can set the activation operation such as preset tour, pattern and enable. Period: Click set button, you can see an interface is shown as in Figure 4-35. Here you canset for business day and non-business day. In Figure 4-35, click set button, you can see an
