Qvis IAPOLLO HDRT HD User Manual
                                                                                                                                                                                                                                   | |
Contents
| 
© Copyright Qvis® All documentation rights reserved. 85Figure 5-75.3.2 EncodeEncode setting includes the following items. See Figure 5-8.Please note some series do not support extra stream. Channel: Select the channel you want. Type: Please select from the dropdown list. There are three options: regular/motiondetect/alarm. You can set the various encode parameters for different record types. Compression: System supports H.264. Resolution: System supports various resolutions, you can select from the dropdown list.The main stream supports D1/HD1/2CIF/CIF/QCIF and the extra stream supports CIF/QCIF.Please note the option may vary due to different series. Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode. Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set videoquality. Quality: There are six levels ranging from 1 to 6. The sixth level has the highest imagequality. Video/audio: You can enable or disable the video/audio. Overlay: Click overlay button, you can see an interface is shown in Figure 5-9. Cover area (Privacy mask): Here is for you to set privacy mask section. You can dragyou mouse to set proper section size. In one channel video, system max supports 4zones in one channel. Preview/monitor: privacy mask has two types. Preview and Monitor. Preview meansthe privacy mask zone can not be viewed by user when system is in preview status.Monitor means the privacy mask zone can not be view by the user when system is inmonitor status. Time display: You can select system displays time or not when you playback. Pleaseclick set button and then drag the title to the corresponding position in the screen. Channel display: You can select system displays channel number or not when youplayback. Please click set button and then drag the title to the corresponding position inthe screen. Copy：After you complete the setup, you can click the Copy button to copy currentsetup to other channel(s). You can see an interface is shown as in Figure 5-10. You cansee current channel number is grey. Please check the number to select the channel or |
Related manuals for Qvis IAPOLLO HDRT HD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine