© Copyright Qvis® All documentation rights reserved. 323.3.3 iApollo PRODCThis series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.Important:If the HDD amount is less than four, you do not need to install the HDD bracket. When there is abracket, please make sure the installation direction of HDDs is the same.2. Remove the HDD upperbracket3. Now you can see the bottombracket5. Use screws to fix HDD. 6. Install the upper bracket and thenUse screws to fix HDD in thebracket.7. Unfasten the HDD powercable.9. Use the special data cable toconnect the HDD and the SATAport. Close the chassis and fixthe screws to secure firmly.8. Insert the HDD powercable.1. Loosen the screws of theupper cover.4. Line up the HDD to thefour holes of the HDDbracket.
