Qvis IAPOLLO HDRT HD User Manual

Contents

Qvis IAPOLLO HDRT HD User Manual Manual pdf 67 page image

© Copyright Qvis® All documentation rights reserved. 58Figure 4-174.5 ScheduleAfter system booted up, it is in default 24-hour regular mode. You can set record type andtime in schedule interface.4.5.1 Schedule MenuIn the main menu, from setting to schedule, you can go to schedule menu. See Figure 4-18. Channel: Please select the channel number first. You can select “all” if you want to set forthe whole channels. Week day: There are eight options: ranges from Saturday to Sunday and all. Pre-record: System can pre-record the video before the event occurs into the file. The valueranges from 1 to 30 seconds depending on the bit stream. Snapshot: You can enable this function to snapshoot image when alarm occurs. Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm. Holiday setting: Click it you can see an interface shown as in Figure 4-19. Here you can setholiday date. Check the box, it means current channel shall record as your holiday setup.Please go to the Period interface to set the holiday date record setup. Please note you needto go to Chapter 5.3.1 to enable Holiday function first.Please highlight icon to select the corresponding function. After completing all the setupsplease click save button, system goes back to the previous menu.At the bottom of the menu, there are color bars for your reference. Green color stands forregular recording, yellow color stands for motion detection and red color stands for alarmrecording. The white means the MD and alarm record is valid. Once you have set to recordwhen the MD and alarm occurs, system will not record neither motion detect occurs nor thealarm occurs.