© Copyright Qvis® All documentation rights reserved. 1265.6.1 HDD InformationHere is to list hard disk type, total space, free space, video start time and status. See X 3 9 1 H 3 9 1 H 3 9 1 H See Figure5-67.○ means current HDD is normal. X means there is error. - means there is no HDD.If disk is damaged, system shows as “?”. Please remove the broken hard disk before you add anew one.Once there is a hard disk confliction, please check hard disk time and system time is the same ornot. Please go to setting then general to modify system time. At last, reboot the system to solvethis problem.After system booted up, if there is any confliction, system goes to HDD information interfacedirectly. Please note, system does not ask you to deal with it forcedly.When HDD confliction occurs, you can check system time and HDD time are identical or not. Ifthey are not identical, please go to General (Chapter 5.3.1) to adjust system time or go to HDDManagement (Chapter 5.5.1) to format HDD and then reboot the DVR.Figure 5-67Tips: Please click Fn button or left click mouse to view HDD record time and HDD type and time.Double click the HDD information; you will see the HDD SMART information.
