© Copyright Qvis® All documentation rights reserved. 124Figure 5-63Click Data button you can see an interface is shown as in Figure 5-64.Here you can set offset value, length, title according to your communication protocol and datapackage. .Figure 5-645.5.10 Config BackupThe configuration file backup interface is shown as below. See Figure 5-65.This function allows you to import/export system configuration. You can use this function whenthere are several devices need the same setup. Export: Please connect the peripheral device first and then go to the following interface.Click Export button, you can see there is a corresponding “Config_Time” folder. Double clickthe folder, you can view some backup files. Import: Here you can import the configuration files from the peripheral device to currentdevice. You need to select a folder first. You can see a dialogue box asking you to select afolder if you are selecting a file. System pops up a dialogue box if there is no configuration
