© Copyright Qvis® All documentation rights reserved. 1557.8.2 NetworkTCP/IPThe TCP/IP interface is shown as in Figure 7-24.Figure 7-24Please refer to the following sheet for detailed information:Parameter FunctionMode There are two modes: static mode and the DHCP mode. The IP/submask/gateway are null when you select theDHCP mode to auto search the IP. If you select the static mode, you need to set theIP/submask/gateway manually. If you select the DHCP mode, you can view theIP/submask/gateway from the DHCP. If you switch from the DHCP mode to the static mode, youneed to reset the IP parameters. Besides, IP/submask/gateway and DHCP are read-onlywhen the PPPoE dial is OK.Mac Address It is to display host Mac address.IP Version It is to select IP version. IPV4 or IPV6.You can access the IP address of these two versions.IP Address Please use the keyboard to input the corresponding number tomodify the IP address and then set the corresponding subnetmask and the default gateway.Preferred DNS DNS IP address.Alternate DNS Alternate DNS IP address.
