© Copyright Qvis® All documentation rights reserved. 87Figure 5-115.3.3 SchedulePlease refer to chapter 4.5 schedule.5.3.4 RS232RS232 interface is shown as below. There are five items. See Figure 5-12. Function: There are various devices for you to select. Console is for you to use the COM ormini-end software to upgrade or debug the program. The control keyboard is for you tocontrol the device via the special keyboard. Transparent COM (adapter) is to connect to thePC to transfer data directly. Protocol COM is for card overlay function. Network keyboard isfor you to use the special keyboard to control the device. PTZ matrix is to connect to theperipheral matrix control. Baud rate: You can select proper baud rate. Data bit: You can select proper data bit. The value ranges from 5 to 8. Stop bit: There are three values: 1/1.5/2. Parity: there are five choices: none/odd/even/space mark.System default setup is: Function: Console Baud rate:115200 Data bit: 8 Stop bit: 1 Parity: NoneAfter completing all the setups please click save button, system goes back to the previous menu.
