© Copyright Qvis® All documentation rights reserved. 120Add/Modify UserClick add user button, the interface is shown as in Figure 5-57.Please input the user name, password, user MAC address and select the group it belongs tofrom the dropdown list. Then you can check the corresponding rights for current user.For convenient user management, usually we recommend the general user right is lower thanthe admin account.The modify user interface is similar to Figure 5-57.Figure 5-57When you create a new user, you can input the corresponding MAC address of current user. Ifyou leave this item in blank, any MAC address user can share this user account to login. Pleasenote system needs to check the validity of MAC. Only the 12-digit 0-f format address can passthe validity verification. System only saves small character even you input capitalized one. Youcan see the corresponding prompt if there is any illegal input.5.5.6 Auto MaintenanceHere you can set auto-reboot time and auto-delete old files setup. You can set to delete the filesfor the specified days. See Figure 5-58.You can select proper setup from dropdown list.After all the setups please click save button, system goes back to the previous menu.
