© Copyright Qvis® All documentation rights reserved. 313.3.2 iApollo PROLITEThis series DVR has four SATA HDDs. Please use HDD of 7200rpm or higher.4. Turn the device upside downand then turn the screws infirmly.in the chassis.5. Fix the HDD firmly. 6. Connect the HDD cable andpower cable.7. Put the cover in accordancewith the clip and then place theupper cover back.8. Secure the screws in the rearpanel and the side panel.1. Loosen the screws of theupper cover.2. Line up the HDD to the fourholes of the HDD bracket.3. Use four screws to fix HDD.4. Unfasten the HDD powercable.5. Use the special data cable toconnect the HDD and the SATAport6. Insert the HDD power cable.Close the chassis and fix thescrews to secure firmly.
