Scanning_ 104For example, if you want to use the settings from the last job, pressPrevious 1.5. Press OK.6. Press Yes when the confirmation window appears.The machine is now set to scan according to the setting you selected.7. Press the Start button to scan and send the file.If an original is placed on the scanner glass, the machine shows thewindow asking if you want to place another page. Load another originaland press Yes. When you finish, press No on this window.• To cancel the current scan job, press Stop on the control panel. Oryou can delete current and pending jobs using Job Status on thecontrol panel. Select the job you want to cancel and press Delete(see "Job Status button" on page 30).• While the machine is sending an email, you cannot use themachine to copy or to send a fax.Saving documentsYou can save the scanned originals to Document Box (the machine’sHDD) in your machine. The documents saved in Document Box can beprinted, if necessary.• For details about how to use the Document Box, refer to theDocument Box chapter (see "Document box" on page 167).• If important data is stored in the Document Box, we recommendyou to backup the data regulary. Samsung disclaims allresponsibility for damage or loss of data caused by misuse orfailure of the machine.• Scan to USB is not supported the Save Document feature.1. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 35).2. Press Scan to Email or Scan to Server from the display screen.3. Set scan features in the Advanced, Image, or Output tabs (see"Changing the scan feature settings" on page 96).4. Press the Basic tab. Then you need to enter the each item using thepop-up keyboard.5. Set the scan quality by Duplex and Resolution (see "Scanning fromboth sides of originals" on page 96 and "Changing the resolution" onpage 96).6. Press Save Document.7. Press Send&Store or Store only.• Off: Disables this option.• Send&Store: Sends and stores scanned originals.• Store only: Stores scanned originals only.8. Press File Name input area. Then the pop-up keyboard appears.Enter the file name you want. Press OK.9. Select a destination box and press OK.10. Press Start from the control panel to begin scan and send the file andstoring, or storing only.If an original is placed on the scanner glass, the machine shows thewindow asking if you want to place another page. Load another originaland press Yes. When you finish, press No on this window.• To cancel the current scan job, press Stop on the control panel.You can also delete current and pending jobs using Job Status onthe control panel. Select the job you want to cancel and pressDelete (see "Job Status button" on page 30).• While the machine is sending an email, you cannot use themachine to copy or to send a fax.
