Copying_ 79Using a programs settingThis option allows you to save the current settings for future use. You canalso use the previous settings from the last jobs.Saving Programs1. Press Copy from the display screen.2. Adjust the settings for each copy such as Paper Supply,Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing thesettings for each copy" on page 54).3. Set the copy features in the Advanced or Image tabs, if necessary (see"Using special copy features" on page 61).4. Press the Basic tab or Back.5. Enter the number of copies using the numeric keypad on the controlpanel, if necessary.6. Press Programs.7. Press Program Name input area. The pop-up keyboard appears.Enter the program name you want. Press OK.You can see the values of set Programs by scrolling up or downand check the values using the up/down arrows.8. Press Save. When the confirmation window appears, the settings youset are saved. Click Go to List or Close.Using Programs1. Press Copy from the display screen.2. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 35).3. Press Programs > List.4. Press a program name you want to use on the list.5. Press OK.6. Press Yes when the confirmation window appears.The machine is now set to copy according to the setting you selected.7. Press Start from the control panel to begin copying.Managing Programs1. Press Copy from the display screen.2. Press Programs > List.3. Press the appropriate option.• Select All: Selects all programs for deleting all.• Detail: Displays detailed information of the selected program.• Edit: Changes the name of the selected program.• Delete: Removes the selected programs.4. Press Cancle for return to the Basic tab.
