Media and tray_ 48Setting the paper type1. Press Machine Setup > Tray Settings > Settings > select the tray youwant from the display screen.2. Press Paper Type and select the paper type.3. Press OK.Auto tray switchThis is the option to set if the machine is to continue printing or not whenany tray becomes empty. For example, both tray 1 and tray 2 are filled withthe same size paper, the machine automatically prints from tray 2 after thetray 1 runs out of paper.1. Press Machine Setup > Tray Settings > Settings > Auto Tray Switch.2. Press On.3. Press OK.Auto continueThis option allows you to continue printing when the paper size you have setis mismatched with the paper in the tray. When this option is activated, themachine continues printing using similar or large size paper. If this option isinactivated, the machine waits until the required size paper is loaded in thetray.1. Press Machine Setup > Tray Settings > Settings > Auto Continue.2. Press On.3. Press OK.Paper substitutionWhen the requested paper for a print job is not available in the tray, thisfeature allows you to substitute similar paper size, For example, if therequested ledger sized paper is not available in the tray, this machinesubstitutes A3 for the requested paper.When the paper is substituted, some image loss may occur.1. Press Machine Setup > Tray Settings > Settings > PaperSubstitution.2. Press On.3. Press OK.
