Scanning_ 94• Scan to Edge: Scans originals from edge-to-edge (see "Scan toEdge" on page 101).• Back: Returns to the Basic tab.Output tab• Quality: Adjusts the display quality of the scanned output (see"Quality" on page 101).• Scan Preset: Automatically changes some scan options, such asfile format, resolution, and more. You can adjust options to fit eachspecific purpose (see "Scan Preset" on page 101).• File Format: Selects the file format of the scan output (see "FileFormat" on page 102).• File Policy: Automatically renames or overwrites when the USBmemory device has the same name file (see "File Policy" onpage 102).• Folder Creation: Automatically create a new folder for storing thescanned image (see "Folder Creation" on page 103).• Back: Returns to the Basic tab.Scanning to a USB memory device• The machine cannot detect the unformatted USB memory device.Format, and then reinsert the USB memory device into the USBmemory port on your machine.• The machine could not detect the USB memory device when themachine is in power save mode. Wait until the machine returns toready mode, and then reinsert the USB memory device into theUSB memory port on your machine.• The machine has two USB memory ports. When a USB memory isalready inserted to one of the port, if you try to insert a USBmemory device to another port, the machine cannot detect secondone. Remove the USB memory device which is inserted first andthen reinsert the USB memory device you want to insert into theUSB memory port on your machine.1. Insert a USB memory device into the USB memory port on yourmachine.2. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 35).3. Press Scan to USB from the display screen.4. Press the Basic tab.5. Select a folder for scan image stored. If you do not select a folder, thescanned image is stored in root.6. Set the scan quality by Duplex and Resolution (see "Scanning fromboth sides of originals" on page 96 and "Changing the resolution" onpage 96).7. Set the scan features in the Advanced, Image, or Output tabs , ifnecessary (see "Changing the scan feature settings" on page 96).8. Press the File Name input area. The pop-up keyboard appears.9. Enter a file name to store the scan data. Press OK.10. Press the Start button to scan and store the file.If an original is placed on the scanner glass, the machine shows thewindow asking if you want to place another page. Load another originaland press Yes. When you finish, press No on this window.11. After scanning is complete, you can remove the USB memory devicefrom the machine.
