Scanning_ 108Preview Pane.7. Drag the pointer to set the image area to be scanned in the PreviewPane.8. Change the scan options in the Image Quality and Scan Area sections.• Image Quality: This option allows you to select the colorcomposition and the scan resolution for the image.• Scan Area: This option allows you to select the page size. TheAdvanced button enables you to set the page size manually.If you want to use one of the preset scan option settings, select theoption from the Job Type drop-down list (see "Adding Job TypeSettings" on page 108).Click Default to restore the default setting for the scan options.9. When you finish, click Scan to start scanning.The status bar appears on the bottom left of the window to show you theprogress of the scan. To cancel scanning, click Cancel.10. The scanned image appears.If you want to edit the scanned image, use the toolbar (see "Using theImage Manager" on page 108).11. When you are finished, click Save on the toolbar.12. Select the file directory where you want to save the image and enter thefile name.13. Click Save.Adding Job Type SettingsYou can save your scan option settings for later use.To save a new Job Type setting:1. Change the options from the Scanner Properties window.2. Click Save As.3. Enter the name for your setting.4. Click OK.Your setting is added to the Saved Settings drop-down list.To save a Job Type setting for the next scan job:1. Select the setting you want to use from the Job Type drop-down list.2. The next time you open the Scanner Properties window, the savedsetting is automatically selected for the scan job.To delete a Job Type setting1. Select the setting you want to delete from the Job Type drop-downlist.2. Click Delete.The setting is deleted from the listUsing the Image ManagerThe Image Manager application provides you with menu commands andtools to edit your scanned image.Use the following tools to edit the image:
