AIAG Forms109Predefined FormsCode V comes with the following two predefined forms already stored inpermanent memory:• AIAG form• Preliminary Metals formThe barcode portions of these predefined forms can be printed at either 120DPI high density or 60 DPI low density. However, the Halfdot Mode reducesprint speed by approximately 50% during the printing of the barcode(s).The predefined forms reside in the printer ROM. If a predefined form is used,it is copied from ROM into the Heap Buffer RAM. The amount of RAM beingused ca be determined by executing the IFORM,L command. If the amount ofthe RAM becomes insufficient for the creation of new forms, the predefinedforms can be deleted from RAM similar to user-defined forms using^IFORM,D or ^IFORM,R.AIAG FormsThe AIAG (Automotive Industry Action Group) form is a cretion of automotiveindustry that utilizes both barcode and human-readable characters to create astandardized label for shipping and identification. The CVCC contains highdensity and low density versions of the AIAG form in ROM. The names ofthese forms are:• AIAG_H.MT for low density.• AIAG_F.MT for high density.The following rules apply when using the AIAG forms:1. If one of the data fields is not completely filled with data, the remainingcharacers for that field must end with ^-, ^*, or ^+.2. If the data field requires both a human-readable field and a barcode field,the same value must be sent for both fields.
