Dashed Lines53BoxesDescription Boxes can be drawn in a variety of shapes, sizes, and lineweights. Maximum box size is limited to the maximum printedpass length and the width of the paper being printed upon.NOTE: When printing boxes, the minimum box length must be greater thantwice the thickness of the vertical borders.The minimum box height must be greater than twice the thickness ofthe horizontal borders.The command for drawing a box is:Command ^LBhhhdvvvdhvArguments^LB The Box command.hhh Horizontal length of the box in increments of 0.1 inches (0.25 cm)from 001 to 132 (0.1 to 13.2 inches or 0.25 to 33.53 cm).d Additional horizontal length of the box in dot-columns, rangingfrom 0 to 9.vvv Vertical height of the box in increments of 0.1 inches (0.25 cm).d Additional vertical height of the box in dot columns, ranging from0 to 9.h Thickness of the top and bottom borders of the box, ranging from1 to 9 dot rows.v Thickness of the two vertical borders of the box, ranging from 1 to9 dot columns.Example 1: The command ^LB0250010062^- prints the following box:^LB The Box command0250 The lengths of the top of the bottom borders are 2.5inches (1.27 cm) with no additional dot columns.0100 Line lengths of the left and right borders are 1 incheach (2.54 cm) with no additional dot rows.6 Line thickness for top and bottom borders is 6 dotrows.2 Line thickness for the right and left borders is 2 dotrows.
