94Chapter 5 Automatic Increment/Decrement^IREPV,2,050^GThis command causes Level A and all the followingpasses to be repeated twice vertically, with aspacing of 0.5 inches.Level A Printed data.^IREPH,2,150^GThis command causes Level B and all otherGraphics Passes within this level to be printedtwice horizontally with a spacing of 1.5 inches.^T003 Tabs the two columns of Level B data 0.3 inchesfrom the left margin.Level B Printed data.^IREPV,3,020^Gthis command causes Level C to print three timesvertically with a spacing of 0.2 inches.^T005 Tabs the two columns of Level C data 0.5 inchesfrom the left margin.Level C Printed data.Automatic Increment/DecrementData items within a repeat sequence can be increased or decreased inpredetermined amounts using the following increment or decrement syntax.Command ^Yx+/-z^GArguments^Y Turns ON the Automatic Increment/DecrementMode.x The operand (the value you start with in anyarithmetic operation). This value can be up totwelve characters long. Valid characters are 0 to 9,the capital letters A to Z, and spaces.+/- Select either the + or the - sign to determinewhether the operand will be incremented ordecremented, respectively.z The operator (the amount that is incremented ordecremented at each step). This must be a numericvalue up to 12 digits long. If the operator exceeds12 digits or if it contains non-numeric characters(other than spaces), the operand remainsunchanged.^G Increment/Decrement Terminator
