318Appendix L 20 CPI Support In PGL20 CPI Support In PGL20 CPI text can now be selected from the ALPHA and DENSITY commands.Use C20 in the ALPHA command and 20 in the DENSITY command.SCALE Command Modifications In PGLThe SCALE command has been modified in the following manner:Field Function Option/ModifierSelectionsDot Scale PlacementSCALE; This is the commandspecifier.Command IdentifierDOT Specifies that placementwill be done using adot-scale.Enter DOT to specify a dotmeasurement scale(dot-columns and dot-rows).;HORZ An optional parameter thatspecifies the horizontalDPI used to placeelements on the form.Enter the horizontal DPI.No value will result in thedefault setting of 60.;VERT An optional parameter thatspecifies the vertical DPIused to place elements onthe form.Enter the vertical DPI. Novalue will result in thedefault setting of 72.Character Scale PlacementSCALE; This is the commandspecifier.Command IdentifierCHAR Specifies that placementwill be done using acharacter-scale.Enter CHAR to specify acharacter measurementscale (columns and rows).;LPI An optional parameter thatcan be used to specifyLines Per Inch settings forprint output.Selections that can beused are 6, 8, 9, 10, 12,and 15. No value willresult in the default settingof 6 LPI.;CPI An optional parameter thatcan be used to specifyCharacters Per Inchsettings for print output.Selections that can beused are 10, 12, 13, 15,17, and 20. No value willresult in the default settingof 10 CPI.
