Special Features227For the parameter (n), a distinction must be made between two types ofrepresentation:• if the parameter is in pointed parentheses, the decimal value must betransmitted• if the parameter is not in pointed parentheses, the ASCII value must betransmittedExample:Parameter representation: , with n=0to be transmitted: dec.0 (hex.00)Parameter representation: n, with n=0to be transmitted: ASCII "0" (hex.30, dec.48)Character explanation and symbol descriptionsSpecial FeaturesIf you did not receive the required Barcode control codes from the ASCII codetable columns 0 and 1 from your computer, use a set of MTPL sequences togenerate these control codes by printable ASCII characters. The Barcodeprograms will remain fully compatible in spite of the additional MTPLsequences.The following control codes in Barcode strings can be substituted by theappropriate ANSI sequences:Table 43. Barcode Strings Control CodesControl CodeANSI Sequence(CSI = Hex 9B orHex 1B 5B or ESC[)Example (Hex)SUB CSI 26 Space s 1B 5B 32 36 20 73EM CSI 25 Space s 1B 5B 32 35 20 73DC4 CSI 20 Space s 1B 5B 32 30 20 73DLE CSI 16 Space s 1B 5B 31 36 20 73SI CSI 15 Space s 1B 5B 31 35 20 73ANSI sequences without matching parameters will be ignored.Information/important notes[ ] Optional, must be not necessarily be transmitted9-needle printer24-needle printer
