151 QMS® Code V™ GraphicsProcessing LanguageThis manual describes the features and uses of the Code V GraphicsProcessing Language. Code V uses a Graphics Processing Language (GPL)that provides the user with total control over the printing and formatting ofgraphics images. This GPL is compatible with QMS® Code V™ versions 1 and2 and includes the following features.• Block characters, printed horizontally or vertically with height and widthranging from 0.1 to 9.9 inches. In addition to normal black on whiteprinting, block characters can be printed in special half-tone patterns or inreverse image (white characters on a black background).• Numerous barcodes, including Code 39 Interleaved 2 of 5, UPC, EAN,Code 128, and Codabar. All barcodes can be printed horizontally orvertically with various height, width, and ratio dimentions. Barcodes mayalso be printed with or without human readable characters in a widevariety of fonts.• Solid or dashed line drawings using various line thickness.• Box drawing with user definable size and border thickness.• Horizontal and vertical duplication of graphics images.• User-definable, memory resident forms, including optional font fields.• Predefined AIAG and Primary Metals forms.• Draft, NLQ, OCR-A, and OCR-B typefaces in various sizes.• Predefined symbols such as copyright (©) and registered trademark (®).• A plot mode.• All extensive command set providing total control over the formatting andprinting of graphics images.
