228Chapter 11 Secured/Unsecured ModeNOTE: These features are not available on all printers with MTPL emulation.Special firmware may be necessary. Ask your service representativefor details.Secured/Unsecured ModeData StructureASCII ESC “P” “S” “C” “0” ESC “\” Unsecuredhex. 1B 50 53 43 30 1B 5C Modedec. 27 80 83 67 48 27 92ASCII ESC “P” “S” “C” “1” ESC “\” Securedhex. 1B 50 53 43 31 1B 5C Modedec. 27 80 83 67 49 27 92DescriptionIn Secured Mode, the amount of space the barcode or LCP character requiresis secured. In each line, additional barcode and normal characters can beprinted.These additional characters are printed in the current line and in the followinglines without influencing the barcode or LCP character. As a result, normalcharacters can be printed to the right or left of the barcode or LCP character ineach line.To guarantee successful barcode and LCP character printing, it is important toinsert the correct paper feed commands, so that the paper feed is ensured tothe end of the barcode and LCP height.In Unsecured Mode, the paper feed necessary for barcode and LCP printingis automatic and is not possible to print mroe than one line with normalcharacters in the barcode and LCP line.All characters in the mixed line are printed, so that the bottom edges arealigned in a straight line.Unsecured mode ESC PSC0 ESC \Secured mode ESC PSC1 ESC \
