55-9 Network SetupEthernet (Port Setup)Enable Ethernet—Select to connect the Fiery EX2101 to an Ethernet network.Transmission Speed—Select an appropriate setting according to the settings of thenetwork to which the Fiery EX2101 is connected.N OTE : When you select Auto Detect, make sure that the auto-negotiation settings forspeed and duplex are configured for the network port to which the Fiery EX2101 isconnected. Similarly, when you select a different setting such as 100 MbpsFull-Duplex, make sure the same settings are configured for the network port.ProtocolsYou can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for theFiery EX2101. It works in conjunction with the Windows XP Local Area ConnectionProperties Control Panel. When you click the Modify or Advanced button next to thesetting, the system opens the Windows XP Local Area Connection Properties ControlPanel, where you complete the settings.By default, the AppleTalk, IPX/SPX, and TCP/IP protocols are installed and enabled.
