44-21 Network Setup optionsClear Frame TypesTo clear all frame types at once choose Exit IPX/SPX Setup>IPX/SPX Setup>ClearFrame Types.Service Setup optionsPServer is a program in the Fiery EX2101 software that can service the Novell Printqueues assigned to the Novell print servers you have set up for printing to theFiery EX2101. When you choose PServer Setup and enable PServer, you can set upNDS (Novell Directory Services), Bindery Services, or both. NDS is used withNetWare; Bindery Services are used with NetWare in bindery emulation mode.Select Frame TypesEnable IPX Auto Frame TypeYes/No [No]Specify whether the Fiery EX2101 should try to bind to all available frame typesautomatically. The Fiery EX2101 does so whether or not all frame types areappropriate. To determine the frame types that were successfully bound, save yourchanges, exit Setup, restart the Fiery EX2101, and print a Configuration page. TheConfiguration page lists only one of the frame types that were successfully bound.If you answer No to this option, you can select frame types manually. You must chooseat least one frame type to enable IPX/SPX protocols.The frame selection screen allows you to make multiple selections. Depending on yourPort Setup selection, only Ethernet frame types, or all frame types are displayed.Press the line selection button beside each frame type used on your IPX/SPX network.An asterisk (*) appears beside each selected frame type. Press the line selection buttonagain to cancel a selected frame type. Use the up and down arrow buttons to scroll toadditional frame types. The Fiery EX2101 binds to each frame type as you select it.When you have selected all the frame types used, choose Exit IPX/SPX Setup.Exit IPX/SPX SetupSelect Frame TypesClear Frame TypesIPX/SPX SetupExit IPX/SPX SetupEthernet 802.2 *Ethernet 802.3Ethernet IIIPX/SPX Setup
