22-19 Fiery EX2101 on a network with UNIX workstationsT O PRINT TO THE F IERY EX2101• On a UNIX system running Solaris 8, use the lp command to send a job to theFiery EX2101.• Windows NT 4.0/2000/XP users with the TCP/IP protocol loaded can send print jobs tothe Fiery EX2101 from their applications or from a command prompt.When Windows NT 4.0/2000/XP users print from applications, they can set printoptions with the driver but not from the UNIX command line.Managing print jobsUNIX network administrators can use UNIX utilities for viewing the list of jobs, andfor printing and removing jobs that are spooled to UNIX servers. If the networkincludes a Windows NT 4.0/2000/XP workstation that has TCP/IP protocols loaded,you can use Command WorkStation or Fiery Downloader™ to download fontsand files.The job management tools also allow you to manage jobs from remote workstations.For more information, see the Job Management Guide.Even without the Fiery utilities, you can:• Set up the Fiery EX2101 to print a log of printed jobs automatically after every 55jobs (see “Job Log Setup” on page 4-46).• Print a Job Log manually at any time from the Command WorkStation Functionsmenu (see the Job Management Guide).
