77-16 Administering the Fiery EX2101Rebooting the Fiery EX2101Use the following procedure to reboot the Fiery EX2101. Reboot System shuts downand restarts the Fiery EX2101 system software and operating system.T O REBOOT THE F IERY EX21011. Make sure the Fiery EX2101 is not receiving, processing, or printing a job.Make sure the status message on the Control Panel reads Idle.2. Press the Menu button to display the Functions menu.3. Use the down arrow button to scroll to the last screen, and choose Shut Down.4. Use the line selection button to choose Reboot System.To access the FACI, if installed, you must enter the user name and the password at theFACI. The user name is Administrator, and the default password is “Fiery.1”.Shutting down the Fiery EX2101You may have to shut down the Fiery EX2101 for service. When you do so, fontsdownloaded to the hard disk are not deleted. Print jobs in the Hold and Printedqueues and jobs that have been processed but not printed are not deleted and areavailable for printing when you restart the Fiery EX2101.
