44-11 Server Setup optionsN OTE : If you make a mistake during Setup, use the Menu button to cancel withoutsaving changes. Pressing the Menu button cancels what you are doing in the currentscreen to bring you to the next higher-level menu. You may have to press Menu morethan once to return to the top level for the particular Setup in which you are working.Once at the top level, you can enter a Setup menu again, or exit without makingchanges.When you have entered the settings, you must save the changes. You are usuallyprompted to do so. If you choose Yes, your settings overwrite previous settings. If youchoose No, your previous settings are retained. If necessary, the Fiery EX2101 restartsafter you exit from the Setup menu.Server Setup optionsThe Server Setup menu allows you to specify system information that pertains to theFiery EX2101 and all users. To access the menu, follow the instructions on page 4-8.When you choose Server Setup, the options appear in sequence, as follows. Defaultvalues, where applicable, appear in square brackets. Words shown in italics indicatethat a product- or site-specific value is displayed.Server NameDefault server nameEnter a name for the Fiery EX2101 (up to 15 characters long). This name appears inthe Chooser on an AppleTalk network.N OTE : Do not use the device name (EX2101) as the server name. Also, if you have morethan one Fiery EX2101, do not give them the same name.System DateEnter the correct system date in the standard form for your use. The date appears onthe Job Log.Exit SetupServer SetupNetwork SetupPrinter SetupSetupPress button for Server Setup
