44-6 Performing Setup from the Control PanelFunctions menuThe Functions menu provides many of the options available fromCommand WorkStation. Choose the following commands from this menu:Functions Press the Menu button to display the Functions menu. Use the up and downarrow buttons to scroll through the list. Press the line selection button to the rightof a command to select that command. For more information, see “Functionsmenu” on page 4-6.Network The Network icon appears in the lower-left corner of any of the other screenswhen a job is being sent to the Fiery EX2101 over the network. The Network iconalso appears, together with a flashing green activity light, when a remote utilityis running.Print Pages Print special pages from the Fiery EX2101. You can print the following pagesfrom the submenu that appears:PS Test Page/PCL Test Page—A Test Page allows you to confirm that theFiery EX2101 is properly connected to the copier, and provides grayscale samplesto troubleshoot problems with the copier or the Fiery EX2101. Settings on theTest Page may include: Server Name, Printer Model, and date and time the TestPage was printed.Configuration—Prints the Configuration page, which gives the current server anddevice configuration. This page lists general information about the hardware andsoftware configuration of the Fiery EX2101, the current options for all Setupsettings, and the Ethernet address of the Fiery EX2101.Job Log—Prints a log of the last 55 jobs. For information on the fields in the JobLog and on printing it in other forms, see the Job Management Guide.PS Font List/PCL Font List—Prints a list of all fonts currently on the Fiery EX2101hard disk.E-mail Log—Prints a log listing recent e-mail activity. This E-mail log is useful tothe network administrator. To print the log, Enable E-mail Services must be set toYes in Network Setup>Service Setup>E-mail Setup.Suspend Printing Suspend communication between the Fiery EX2101 and the copier.Resume Printing Resume communication between the copier and the Fiery EX2101.
