77-5 Clearing the Fiery EX2101Clearing the Fiery EX2101The Clear Server command allows you to clear all queued print jobs from theFiery EX2101—jobs in the Fiery EX2101 Print, Hold, and Printed queues. Jobs canalso be deleted, either individually or as a group, using the job management tools.Clear Server also clears the Job Log, all jobs archived on the Fiery EX2101 hard disk,the index of archived jobs, and finally, all FreeForm masters and the index of FreeFormmasters.To clear the Fiery EX2101 from the Control Panel, scroll through the Functions menuand choose Clear Server. You are asked to confirm your selection. If the Administratorpassword has been set, you are prompted to enter it.To clear the Fiery EX2101 from the FACI, right-click FieryBar and selectClear Server.Using the Fiery EX2101 hard diskBe sure to back up your original data on your own media at the same time you storeand save data on the Fiery EX2101 hard disk. Never damage the Fiery EX2101 harddisk. Do not turn off the system while accessing the Fiery EX2101 hard disk. Forinstructions on how to turn on and shut down the Fiery EX2101, see “Starting andshutting down the Fiery EX2101” on page 7-14.If the Fiery EX2101 hard disk or system software experiences technical difficulties,data stored and saved on the Fiery EX2101 hard disk might be irretrievably lost.Extended storage of the following data on your Fiery EX2101 hard disk cannot beassured if unexpected events occur:• Third party fonts installed on Fiery EX2101 hard disk• Print jobs stored on the Fiery EX2101 hard disk• Job notes and instructions• Jobs edited with DocBuilder Pro
