33-7 Fiery EX2101 system softwareUsers can print only to the Hold queue; the administrator and the operator havecomplete control of job flow; no access to Fiery WebTools.Fiery EX2101 system softwareThe Fiery EX2101 uses Windows XP Embedded system architecture to receive andprocess jobs and send job data to the copier. To log on to the Fiery EX2101, enterAdministrator as the user name, and enter the password (“Fiery.1”).N OTE : Configuring and monitoring the Windows XP functions from theFiery EX2101 require the FACI option. For more information, contact yourauthorized service/support technician.Resident on the Windows XP software is the following software unique tothe Fiery EX2101:• Server—The Server is an independent software process started automaticallywhenever Windows XP is started. As the central element of Fiery EX2101 systemsoftware, the Server process controls the spooling, rasterizing, and printing of jobs,as well as job accounting (the Job Log), storage, and retrieval.When the Server is not running, jobs cannot be received by the Fiery EX2101, jobprocessing cannot occur, job data cannot be transferred to the copier for printing,and the job management tools cannot connect to the Fiery EX2101. In the eventthat you must restart the Server process, right-click FieryBar™ and chooseRestart Fiery.• Command WorkStation—Command WorkStation is the interface tool for theServer. It provides a graphical interface for viewing and controlling Server functions.Use these settingsin Setup1(Minimum)2 3 4 5(Maximum)Enable Direct connection √ √ √Enable Print queue √ √ √ √Enable Web Services √ √ √Set an Administrator Password(strongly recommended )√ √ √ √Set an Operator password √ √ √
