DEFINING CLUSTERSXEROX DOCUPRINT 180 LPS PDL REFERENCE 5-5Defining clusters and stocksets with PDL and DJDEThe PDL commands and DJDEs listed here relate to clusters. Formore detailed information on each command, refer to the chapters“Specifying output parameters” and “Specifying dynamic jobdescriptor entries (DJDEs).”PDL commandsThe STOCKSET and OUTPUT commands specify cluster and stocksin your JSLs.The STOCKSET and OUTPUT commands and their syntax areshown in tables 5-2 and 5-3.DJDEsThe FEED and STOCKS dynamic job descriptor entries changestocks and clusters on a page-by-page basis.The FEED and STOCKS commands and their syntax are shown intable 5-4.Table 5-2. STOCKSET parameter(s) and option(s)Parameter(s) Option(s)ASSIGN = {stock-descriptor | (stock-descriptor 1[,stock-descriptor 2][,...])}INIFEED = {stock-name |stock-reference}SYSPAGE = {stock-name |stock-reference | MAIN | AUX}Table 5-3. OUTPUT parameter(s) and option(s)Parameter(s) Option(s)FEED = {stock-reference | (stock-name | MAIN | AUX |OPR}STOCKS =stockset-nameTable 5-4. STOCKSET parameter(s) and option(s)Parameter(s) Option(s)FEED = {stock-reference |stock-name | MAIN | AUX |OPR}STOCKS =stockset-name
