SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)8-68 XEROX DOCUPRINT 180 LPS PDL REFERENCETRANSThis parameter specifies whether or not transparencies are used inthe print job.Syntax TRANS =option(s)Options Table 8-59 lists the parameter option(s) and definition(s).XSHIFTThis parameter specifies whether the image of the form and data ona page is to be shifted, and if so, by what values. This parameter isused to shift the image of the data for two-hole paper, binding,finishing, and edgemarking. XSHIFT allows shifting in the x-directionfor short-edge binding.Syntax XSHIFT =option(s)Options Table 8-60 lists the parameter option(s) and definition(s).Table 8-63. TRANS parameter option(s) and definition(s)Option(s) Definition(s)YES Specifies that transparencies are used in the printjob.NO Specifies that transparencies are not used in the printjob.Table 8-64. XSHIFT parameter option(s) and definition(s)Option(s) Definition(s)NO Specifies that no shift occurs.value An integer that specifies a shift amount on the frontand back side. The shift is in the x-direction and eachdot is 1/300 of an inch. The allowable range is 75 to-75.
