PRINT FORMAT COMMANDSXEROX DOCUPRINT 180 LPS PDL REFERENCE 6-15Points to noteNote the following when using the ACCT command:• If the report completion code on the accounting page is non-zero, an accounting page is delivered to the tray even ifUSER=NONE is coded. This is done to notify the user of apossible report integrity problem.However, if the report is duplex and the first integrity problemoccurs within the last eight back sides, the report completioncode on the forced accounting page is zero.• Jobs aborted by input as a result of job recovery produce anaccounting page with as much accounting information as canbe salvaged. The accounting page is delivered to both the binand the sample tray.• When ACCT USER=BOTH is specified, the two accountingpages show different values for ”Output Processing Time.“ Thesheet sent to the stacker will show a time about one secondlonger than the sheet sent to the sample tray. All other valuesshould match.• Hexadecimal strings in a DEPT parameter are interpreted asstandard EBCDIC and translated to Extended ASCII.• A completion code of 0 indicates that the report may havecompleted successfully, except when a report integrity problemoccurs within the last eight duplex pages.ExampleACCT DEPT=’BUDGET’,USER=(BIN,TRAY);After each report is printed, an accounting page is delivered to theoutput bin and sample print tray. Accounting information for each job(run under this ACCT command) is accumulated in the systemaccounting log under the department name BUDGET. This assumesthe name BUDGET has been entered into the list of accountingnames (through the system level ACCOUNT parameter).
