PRINT FORMAT COMMANDS6-82 XEROX DOCUPRINT 180 LPS PDL REFERENCETMODEThis parameter specifies paper sizes in order to improve throughputefficiency.Syntax OUTPUT TMODE =option(s)Options Table 6-66 lists the parameter option(s) and definition(s).Width values can range from the 8-inch equivalent to the 17-inchequivalent.If you use inches (the default), refer to the table in the “Points to note”section for the value ranges, pages-per-minute speeds, and usesavailable for the various pitch modes.The default depends on the specified paper size; the default value isin inches.Table 6-67. TMODE parameter option(s) and definition(s)Option(s) Definition(s)(width[,width unit])This option has the following components:•widthThe process direction measurement thatdetermines the default pitch mode.•width unitDefines the unit of measurement for the defaultpitch mode in IN, CM, DOTS, and XDOTS.IN (INCHES) is the default.
