SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)XEROX DOCUPRINT 180 LPS PDL REFERENCE 8-67TMODEThis parameter specifies process direction measurement fordetermining default pitch mode.Syntax TMODE =option(s)Options Table 8-57 lists the parameter option(s) and definition(s).TOFThis parameter specifies the top-of-form line number. It takes effectat the next record following a DJDE END. The value parameter isdefined the same as in the VFU command as defined in the chapter"Print format commands."Syntax TOF =option(s)Options Table 8-58 lists the parameter option(s) and definition(s).Table 8-61. TMODE parameter option(s) and definition(s)Option(s) Definition(s)(width [,widthunit])This option has the following components:•widthThe process direction measurement thatdetermines the default pitch mode.•width unitCan be IN, CM, DOTS, or XDOTS. Thedefault is IN.Width values can range from the 7-inchequivalent to the 17-inch equivalent.Table 8-62. TOF parameter option(s) and definition(s)Option(s) Definition(s)value Specifies the number of lines from the top of theoutput page to the first print line on the page (topof form). The top-of-form specification isindependent of channel assignments. It should begreater than or equal to 1 and less than or equal tothe smallest line number assigned to a channel.The default is 1.
