PRINT FORMAT COMMANDSXEROX DOCUPRINT 180 LPS PDL REFERENCE 6-29• Resetting the segment numberYou may set a new segment number after the current one isterminated. This is accomplished when the system encountersa series of two DJDEs: SPLIT=OFF followed bySPLIT=(min,max).In an online environment, banner pages are routed to the current joboutput destination. For example, if a job is being sent to a third partyfinishing device, the banner page will be sent there, also. The systemdoes not redirect banner pages to the sample tray or output binunless you specify that they be routed to a tray other than the jobdestination. Refer to the “BANNER command” section of the chapter“Using logical processing commands,” for more information onspecifying banner pages.ExamplesThe following are sample EXPORT commands:EXPORT SPLIT=(2,7), SNUMBER=(1,75),SEPARATORS=NONE;EXPORT SPLIT=(2,7), SNUMBER=(1,75),SEPARATORS=FIRST, SRECOVER=SEGMENT;
