PRINT FORMAT COMMANDS6-80 XEROX DOCUPRINT 180 LPS PDL REFERENCESTOCKSThis parameter defines the stockset and its associated stock(s) to beused in a report. If the stockset-name does not reference aSTOCKSET command coded earlier in the same JDL, the systemassumes that the stockset exists globally as an STK file, which isread at print time. In this case, PDL inserts a message in the JSL filelisting, indicating that an STK file will be used at print time.Whenever a new stockset is chosen at start of report or through aDJDE JDE and JDL switch, each stock is checked to determine thatthe stock exists and can be made active. This provides an automaticmethod of changing stocks in the LPS as required by the datastream.Refer to the “STOCKSET command” section in the chapter "Definingclusters" for additional information on defining stocks.Syntax OUTPUT STOCKS =option(s)Options Table 6-64 lists the parameter option(s) and definition(s).Table 6-65. STOCKS parameter option(s) and definition(s)Option(s) Definition(s)stockset-nameSpecifies the stockset to be used.There is no default.
