PRINT FORMAT COMMANDS6-110 XEROX DOCUPRINT 180 LPS PDL REFERENCESTOCKSET commandThe STOCKSET command defines a set of stocks used in a report.This allows output to verify the exclusivity of all stocks in terms oftrays currently assigned to them. For your LPS, a stock-name isrepresented by a cluster. For more information refer to the feeder traychapter in yourXerox DocuPrint 180 LPS Operator Guide.Stocksets are also the means of associating stock references withstock names.An identifier (of the type ac) is specified to name the STOCKSETcommand for future reference by the STOCKS parameter of anOUTPUT command.Table 6-81 summarizes the STOCKSET command parameters.The following sections describe the syntax of the commandparameters and explanations of the parameter options.ASSIGNThis parameter associates stocks with the identified stockset.Syntaxac:STOCKSET ASSIGN = {stock-descriptor |(stock-descriptor 1[,stock-descriptor 2 ][,...])}Function Associates stocks with the identified stockset, where:Optionsstock-descriptor = stock=name | (stock-name,stock-reference)Default No defaultTable 6-82 lists the parameter option(s) and definition(s).Table 6-82. Summary of STOCKSET command parametersParameter Specifies Offline Online DJDEASSIGN Lists stock names and association of stockreferences with stock namesY Y NINIFEED Specifies which stock to use in the absence of anyparameters of the FEED parameterY Y NSYSPAGE Specifies which stock to use for system-generatedmessagesY Y NTable 6-83. ASSIGN parameter option(s) and definition(s)Option(s) Definition(s){stock-descriptor |(stock-descriptor1[,stock-descriptor 2][,...])}
